deforming stress

Pointsout that the deforming stress appearing after pouring concrete results in the crack of floor slab.

分析了混凝土浇注后，产生变形应力而导致楼板开裂。

The paper sets up the finite element model of the full compliant mechanism, analyses dynamics performance and gives deforming and stress figures with ANSYS.

通过ANSYS建立了全柔性机构的有限元模型，并进行了力学性能分析，给出了机构的性能图谱；

Applied rated oil pressure and the biggest oil pressure to key parts separately and analyses their deforming and stress. The result was that they meet the operating requirements. 5.

分别施加额定油压和最大油压，分析关键部件在这两种状态下的变形和应力，结果关键部件满足使用要求。

In the paper, based on the deformation theory, the author deduces the distribution regularities of strain, thickness of plate and real stress in the deforming region through analyzing stress and strain in the round hole burring process

通过对圆孔翻边应力应变分析，应用全量理论，推导出了变形区应变、厚度及变形时材料真实应力的分布规律

The distribution of stress around the welding spot is obtained by adopting stress function. The stress, which can make the plastically deforming area appear around the welding spot, is determined on the base of Swift-Hill yield criterion.

用应力函数的方法得到焊点附近应力集中的分布情况，并以Swift-Hill屈服准则为判据，确定了单向拉伸时焊点附近产生塑性变形的力能条件。

On shear deforming lines in plane stress and strain problem

平面塑性变形的剪切变形线

The results showed that in rolling stock deforming zone the equivalent stress gradually increased along the direction of rolling and came to maximum value ( 95.20 MPa) nearby neutral face, than gradually decreased;

结果表明在轧件变形区内，等效应力沿轧制方向逐渐增大，在中性面附近达到最大值（95.20MPa），后又逐渐减少；